Tattoo Power Components

Jun 15, 2019

Leave a message

The computer tattoo power supply is a closed independent component installed in the main box. Its function is to change the alternating current to a stable direct current such as 5V, -5V, +12V, -12V, +3.3V through a switch tattoo power transformer. It is used to supply system components such as system version, floppy disk, hard disk drive and various adapter expansion cards in the main chassis. In general terms, one tattoo power supply is broken, and another backup tattoo power supply is used instead of power supply. Hardware availability can be enhanced by providing battery backup for nodes and disks. HP-supported uninterrupted tattoo power supplies (UPS), such as HP PowerTrust, protect against momentary power loss. The disk and the power supply circuit should be connected in such a way that the mirror copies are connected to different tattoo power sources. The root disk and its corresponding node should be powered by the same tattoo power circuit. In particular, the cluster lock disk (used as an arbiter when reorganizing the cluster) should have redundant tattoo power, or it can be powered by a tattoo power source outside of the nodes in the cluster. Your HP representative can provide detailed information about the cluster's tattoo power, disk, and LAN hardware layout. Many disk arrays and other rack-mounted systems currently contain multiple tattoo power inputs that should be deployed to connect different tattoo power inputs on the device to separate circuit devices with two or three tattoo power inputs, so that under normal circumstances As long as there is no more than one faulty circuit, the system can continue to operate normally. Therefore, if all hardware in the cluster has 2 or 3 tattoo power inputs, then at least three separate circuits are required to ensure that there is no single point of failure in the cluster's circuit design.


Send Inquiry
Send Inquiry