Three kinds.
The first one is handed down by the Maori people. It uses shark teeth and animal bone thorns to tie a wooden stick and dip it in ink, and tap it into the skin with a small hammer.
The second is to tie several needles together and tie them to a wooden stick, and manually pierce the skin into the skin so that the pigment forms a pattern on the skin.
The third is to use a motor to drive the needle into the skin. This method is commonly used by tattoo artists today. Modern people's understanding of tattoos is all-encompassing and highly personalized. This kind of permanent pattern with a little pain will accompany one's life. The commemorative, stimulating, and liberating nature of this body language is different for everyone.
Common sense to learn tattoos
A good tattoo must not only have a good design and composition, but also the correct line. Many people and even professional tattoo artists will have the secant line is too shallow, too thin or the line is faint. This is the result of using the machine or the tattoo method incorrectly.
1. Secant points:
The hands should be steady, and the strength and speed should be even. The greater the intensity, the slower the speed, and the darker the color; otherwise, the lighter the color.
The needle depth is 1MM-1. 5MM, and it must not exceed 2MM. It is usually pierced on the top layer between the basal layer of the skin epidermis and the dermis.
When lowering the needle, keep it perpendicular to the skin as much as possible, and never exceed 20-30 degrees if it is tilted.
The connection should be natural. When cutting a long thread or moving the hand, gently lift the joint, and it is best to see the needle tip. In this way, the place of convergence will be natural and there will be no double lines.
When cutting the thread, we must do it in the order from bottom to top, from right to left, so that we won't embarrass the pattern we transferred.
Beginners must have confidence in themselves, place the needle, and start the needle cleanly, without stopping, otherwise it is easy to stop.
Try not to talk to guests when cutting the thread.
2. Points to pay attention to in several lines
Curved line: pay attention to the line to be smooth, and the connection should be natural and smooth.
Right-angled line: It must be important to pay attention to the right-angle connection.
Arc tip line: Note that the needle must be gently lifted at the end, and the connection must be good.
Arc-pointed round line: Do not stop the needle at the point where it is round, but stop the needle after smoothing it
