This process is widely applicable to tattoo operations.

 Sep 24, 2020

 Leave a message

 


1. Clean: It is best to use purified water or distilled water to wipe the area to be tattooed repeatedly and thoroughly. (Clear skin surface and body hair)

2. Detoxification: Epidermis: Use medical alcohol to wipe the area to be tattooed repeatedly until thoroughly.

Deep level: In principle, we require that the disinfection of a wide range of pointers should be a single-use one, but if it is disinfected and reused under special circumstances, it is best to use a high-temperature steaming method for more than 30 minutes and then wipe it with alcohol cotton before use.

3. Transfer or drawing: If you are a person with very deep art skills, you can paint or directly tattoo on the sterilized skin.

But if you don’t know art or for sound time, using transfer technology is the simplest and most direct method. See the demonstration for detailed operation.

4. Secant: This is one of the most critical aspects of tattooing, and it is also half of the success of the failure. If the secant is done, it is half of the tattoo.

So your secant should be smooth, clear and complete. All in one go. There is a rule for secant, which is to follow the principle of going from bottom to top and from right to left. This will avoid the possibility of blurring or distortion of the pattern during operation. Most of the secant lines are made in black to increase the clarity of the overall effect. Generally, the secant line is completed with a single needle or three needles, which is determined according to the size and style of the pattern.

5. Fog: This link is the other half of the success of the tattoo. After a tattoo is completed, if the fog is not well-painted, it will not reflect the three-dimensional and lively

Sex, let alone artistry. Fogging is usually done with multiple needles, which mainly depends on the mastery and proficiency of the needle method. Never use a single needle to beat the fog, the effect that is made is just a dead, lack of vitality. The fogging must be done with reference to the order of coloring, in short, the pattern you make must be tangible and more important.

6. Repair: This is also an important link. The above five steps are only necessary for the operation. Then the quality of repair determines your preliminary work

Whether the work can be well maintained. If the repair is not done well, there will be problems of this kind and later. Such as rejection, allergies, inflammation, discoloration, etc. In fact, it is very simple to say: nothing more than the three steps of clean, dry, and anti-inflammatory. If these three links are well coordinated, handle it every 20 minutes, seven to eight consecutive times. In the future, you can apply the medicine at the right time according to the situation. Do not take a bath 24 hours after the tattoo. Try to keep the wound dry. Sunscreen, antifreeze, dustproof and scratch-proof. Avoid alcohol and water.


Send Inquiry
Send Inquiry