The process of tattooing is divided into two major steps: "cut line" and "fog", but often a very important process is ignored, that is, "planning". "Planning" is divided into two parts. One refers to the design of the pattern. One refers to the understanding of patterns. Design means that when we decorate for customers, we must consider the long-term development of the patterns and consider future improvements. Because tattoos are a recognition of their own bodies, it has continuity. .
Cut line A good tattoo must have a good composition and correct cut line. Many people, even professional tattoo artists, have cut lines that are too shallow, too thin, or have open lines. This is all Incorrect results of using appliances or tattooing methods. Most tattoo masters use imported tattoo machines, but before that they had to bind and burn their own needles (tie several needles together and then glued them together with solder). Baoding tattoo was designed to reduce the pressure on the tattoo artist. , Tattoo needles (single needle to three needles) are now available, but tattoo fanatics who are novice or stay at home almost always use eyebrow tattoo machines (we do not recommend using eyebrow tattoo machines to Tattoo).
Because the torque and rotation speed of the eyebrow tattoo machine are insufficient, if you want to draw thick, dark and uniform lines, you must use a professional tattoo machine, but you must also master the appropriate methods and methods. When cutting the line, pay attention to the angle between the tattoo machine and the skin. The maximum included angle should not exceed 30 °. If it exceeds 30 °, it will easily lead to the line being open or not colored. We know that when vertical, the cut line is the thickest. When black and striated, the depth of the lower needle should not be too deep, the best is 1-1.5mm.
Fog: There is no specific way to fog. Some people tear it from the inside to the outside, and use heavy fog at the beginning, and light fog at the lighter end. We will temporarily call it "Northwest Rain" pattern. law. Because its disadvantage is that the fog formed will form a fog like radial lines. Baoding tattoo also uses a spiral pattern from the inside to the outside. At the beginning, the force is heavier and it becomes a heavy mist. Another way is to continue to go back and forth from the left and right of the printer's nozzle and gradually develop outward. Gradually letting go of light, you can also form a fog like a gradation.
