There are many types of tattoo machines, including motors, air pump tattoo machines, etc. There are two types of popular tattoo machines on the market, one is a dual machine, and the other is a fit machine. The so-called dual machine is a secant machine and a fog machine. , Performance is different. The fitting machine is a machine. When cutting and fogging, you need to manually adjust the frequency of the machine or the size of the power supply to control the operating speed and needle out of the machine to cut and fog.
A good tattoo machine is not about the price, but the structure of the machine, such as the materials used, the number of coils, the length of the hanging iron, the hardness of the shrapnel, and the feel of the machine. Let me give you a brief explanation. !
The overall material of the tattoo machine is cast iron. The personal experience is that stainless steel is not suitable for tattoo machines, and other materials are not suitable. Only cast iron is the most suitable for the most tattoo machine. As for why I ca n’t tell, there are many machines with smooth appearance. , Color, it means stainless steel or other materials, in fact, all are cast iron, but after finishing, deep processing, smoothing and plating processing, showing color and smoothing effect. The coil of the fogging machine is 10 turns and the cutting line is 8 turns. Of course, it is almost invisible from the appearance, but some fogging and the cutting machine have different coil sizes. The fogging is larger!
In the case of hanging iron, the length of the hanging iron determines whether the needle can bounce without hindrance, but some machines have a short hanging iron, which can be extended by adjusting the shrapnel, but when the shrapnel is extended, The shrapnel is very demanding. The hard shrapnel has a very bad effect when it is extended. The soft shrapnel does not produce good results. Only qualified shrapnel is the most ideal!
The average machine can judge whether the machine is good or bad by listening to the sound. It does not emit sparks and the sound is crisp. You can pass the level of the machine by listening. Here, according to experience, large capacitors are better than small capacitors. , But it is divided into machines! It is best to debug on site when buying a machine!
