The rack setting of the machine is also very important. The setting of some racks is very good, but because the shrapnel does not meet the good requirements, there will be unsatisfactory results. The rack is fixed when bought back, so we can adjust it. The seat of the shrapnel at the rear of the rack becomes smaller to increase the distance between the armature and the armature. Of course, the armature can also be adjusted to lengthen the distance, but it is necessary to pay attention to the relationship between the armature and the rear coil. The strength of Zeng Da Machine.
The width of the front and back single pieces is adjusted, and the length of the purchased shrapnel is fixed. Then we can adjust the width of the shrapnel to achieve the desired effect, but we must pay attention to the matching of the front and back shrapnel, otherwise it will be a bad wave! There is also the material of the machine, which is also of concern to many people. In fact, the material of the machine does not pay much attention, mainly because the strength is enough. It is not said that different materials will have any effect on the speed of the machine!
