First, maintenance: very important Summer Normal one month to return water (according to your machine operating frequency, how long it takes for half a month - summer) can buy a few more bottles of washing time for a long time there will be turbid objects in the tank, which will lead to burning guns.
Second, the tattoo machine adjustment method:
1. Connect the transformer to 220V (110V) galvanic power, turn on the power switch POWER (1 means turn on, 0 means disconnect). The indicator light is red, adjust the button VOLTAGF, turn clockwise slowly, and the V watch will rotate slowly ( A watch will only move when the tattoo machine is working), adjust the V watch pointer to 10V-12V (note: the voltage is too high, the output power is large, the speed is too fast, the electrical contact is fast), then the tattoo machine Insert the plug into the power hole "+ (positive), - (negative)" pole, and then plug the foot switch into another power hole.
2. Insert the other end of the power cord into the socket of the tattoo machine, and then step on the foot switch, the tattoo machine will start. The power light is red, the V is at 10V-12V, but the tattoo machine fails to start (A. may be the spring contact is not in place; B. may be broken the tattoo machine line), if it is A, then need to re-tune the tattoo machine: put the elastic rod First adjust the spring contact, then adjust the spring lever clockwise to the spring contact, and activate the foot switch to make the tattoo machine start, then release the foot switch and turn the spring lever 180° clockwise. -360° Follow the tightening screw to lock the elastic rod. (The transformer has overload protection. When the indicator light is green, the voltage is zero, indicating that a short circuit occurs, and the transformer automatically trips. At this time, the POWER switch should be turned to O and then re-played, the new power supply will be activated and the voltmeter will return to normal.) If it is B, it will be repaired or returned to the supplier for processing.
