One, preparation and selection
Prepare color material, eyebrow tattoo machine, medical vaseline, transfer oil, transfer paper, plastic wrap, etc ...
When selecting pictures on the Internet or in tattoo books, because the tattoo machine is weaker than the tattoo machine, the pattern should not be too complicated.
The lines behind the pattern are thin, and there are not many levels of color blocks. It is easier to operate with a single level.
Print the pattern to the size that the customer likes, and then put professional copy paper (called the transfer paper in the tattoo industry) underneath and trace the pattern again. spare.
The second step, transfer the pattern
Clean and disinfect skin
After applying the transfer oil, press the side of the copy paper with the pattern on it, press it on the skin, do not move your hand, stay for a while, remove the transfer paper, and the pattern is printed on the skin.
When applying petroleum jelly to the pattern, be sure to apply a thin layer, so that it is easy to clean and color.
The third step, the contour line
The good angle for coloring is 90 degrees perpendicular to the skin lines.
Needle insertion depth: When the needle is shallow, the pattern cannot be clearly displayed, and the deeper needle will cause great damage to the skin and the machine. The needle insertion depth is about 1mm to 2mm.
Needle length: In order to make the line more accurate, so that the outgoing color material does not blur the pattern, the needle should not be too short, the length can be 3mm.
Tattoo sequence: In order to avoid flowering the pattern, the needle can be moved from bottom to right and from right to left. Wipe gently after the line passes once, and then repeat the operation until the line color is solid.
A line is so easy to go, the intensity can not be light and heavy.
The fourth step, the pattern block
Coloring: Use the tic-tac-toe method, circle method, repeatedly wash and color, observe the coloring situation, you can use the method of lip bleaching to layer by layer, black first, then other colors.
Needle: You can use the three-round needle to smog, but it is not recommended to operate on a large area, because the power of the tattoo eyebrow machine can not bear it. Forced operation, the machine is scrapped after a few patterns.
Color: Black and red can be used directly with liquid color material. For other colors, it is necessary to use a tattoo-specific colorant for coloring, and the permeability of the tattoo eyebrow colorant is not as good as the tattoo colorant. In addition, use less warm colors and more cool colors, so that it is easier to color with the eyebrow tattoo machine
The fifth step, nursing tattoo
At the end of the tattoo, apply a thin layer of restorative agent, wait for a while, and wrap it with plastic wrap.
Tell the guests to go home for 2 hours, remove the plastic wrap and wash it with warm water.
Repair agent: It must be applied thinly for three days.
Bathing: Do not spend more than 5 minutes, the position of the tattoo, do not touch the bathing supplies, such as shampoo, soap, shower gel, etc., just rinse with water. But if you accidentally touch greasy things, you still need to wash them with soap. Usually keep dry and clean.
Diet: spicy, spicy food, seafood, lamb, and the like.
