Many tattoo artists often make some pictures that need to be fogged or colored when tattooing customers. Beginners are not very good at fogging techniques and feelings. Here is how to make heavy fog and color. The stab technique is for your reference.
The method of heavy fogging is similar to that of color. The needles should be applied more forcefully, and the color should be punctured in the least number of times. The color of the needle tip should be as full as possible, one small piece of thorn, one piece of color thorn If it is enough, move to the next area and gradually connect the small color gamut into a large one. This will have a good effect. New skin will be easier to color, repeated stings will make the color dull, and the color is not bright enough. There is a better way, which is to apply the color with a relatively fine-grained colorant first, and then use a relatively coarse-grained colorant to color the color again. The effect of the superposition of the two color materials will be very good, the color is very bright, but Be sure to master the strength and don't break the skin. When the tattoo color is about 2-3 mm, the needle can be drawn in a circle or flat push, the effect will be different.
When doing white and light yellow, because the color is very light, it is easy to be disturbed by the red after the skin is injured. People with inexperience will feel that the color is not punctured, and then they will puncture harder, which will easily break the skin. We must pay attention to this in the tattooing process.
