There are many ways to make light haze for tattoos. Now I will introduce a few more commonly used methods. There is a principle: diluting the pigment may be more important than the method.
Generally, the needle is usually about 2 millimeters. It is necessary to soften the strength of the machine, and increase the strength from light to heavy. It can be rotated or pushed. The needle is brushing the skin. The tattoo needle can be perpendicular to the skin, or Maintain a certain angle, rubbing the skin repeatedly, the more times you rub, the more uniform the mist, but do not break the skin.
The light mist can be light or heavy, depending on everyone's habits. You can go from dark to light, or from light to dark, and go faster from dark to light.
Before making the mist, you can prepare several color materials of different color levels. When you mix them, you can dilute them with pure diluent, put them in different color material cups for use, and prepare a glass of diluent to adjust the color material at any time. concentration.
The connection between the two color levels is very important when the light fog is excessive, and it is necessary to master the intensity of the excessiveness to make the connection more natural. When transitioning to the darkest color, you should first make the darkest color (black) with the original color without dilution (it is better to do it from dark to light, and it is fast). Don't apply a light-colored base before heavy fogging, because the skin of the injured skin will appear dark when it is heavily fogged, instead of very bright black.
When the thorn is very light, the skin will turn red and look as if it has no color. This is based on experience. An effective method is to see the color of the light haze in a short time on the thorn. The skin will become red without seeing the color, then the color at the moment is the light haze color that you line up.
