1.You can grasp the change of depth by the lightness of the technique, that is, when you enter the needle, you can make a light and dark change when you return to the needle. It can be a change within a stroke, or you can make a large-area overall change, that is, the overall stroke is from heavy to light;
2. The change in depth can be determined by the amount of colorant in the needle mouth. When we touch the colorant thorn, you will find that the color of the first stroke is heavy, and gradually becomes more and more because the colorant is getting less and less The lighter the lighter, the deeper and deeper changes we can grasp based on this characteristic;
3. It can be achieved by diluting the ink color (specifically black). There are three ink colors commonly used by a tattoo artist: pure black, light black, and clear water. These three ink colors are usually used during operation. At the same time make light and dark effects, changes in depth. That is, a deep black part is used to make the transition from the darkest part to the light color, and then a light black part is used to make the transition from the light to the light color. During the transition, the previous stroke must be suppressed by about one centimetre so as to connect to nature.
In today's professional tattoo industry, the pattern has a strong three-dimensional sense, and the color transition between light and dark is orderly, just like fog, so people visually call coloring as fogging.
The ability to master fogging is a measure of whether a tattoo artist ’s skills are qualified.
1. Puncture method: This needle method is usually used less, mainly used for a few patterns with dots. Such as a little petal, tiger's beard root and so on. As long as the original picture needs to prick, the method is very simple.
2. Scanning pin method: generally used for totems or patterns with a relatively large area.
3. Spiral needle method: It is generally circled from the inside out, mainly used for the place where there is a blank after fogging. If the strength is well controlled, it can also be used elsewhere.
4. Fogging needle method: also known as the northwest rain needle method. The mist produced by this needle method is finer and denser, starting from one point, the needle is lowered and the needle is retracted and the needle is lighter, and the operation is repeated. This method is used to reflect the three-dimensional sense, such as: dragon, fish scales.
5. Needle ejection method: similar to the fogging needle method, the lower needle regains the needle lighter, generally arranged neatly, and generally used to reflect the three-dimensional sense.
