A good tattoo must not only have a good design and composition, but also the correct liner. Many people and even professional tattooists will have the secant line is too shallow, too thin or the line is faint. This is the result of using the machine or the tattoo method incorrectly.
Secant points: The hand should be steady, and the strength and speed should be even. The greater the intensity, the slower the speed, and the darker the color; otherwise, the lighter the color. The needle depth is 1MM-1. 5MM, and it must not exceed 2MM. It is usually pierced on the top layer between the basal layer of the skin epidermis and the dermis. Keeping the needle perpendicular to the skin as much as possible when lowering the needle. If it is inclined, it must not exceed 20-30 degrees. The connection should be natural. When cutting a long thread or moving your hand, gently lift the joint, and it is best to see the needle tip. In this way, the place of convergence will be natural, and there will be no double lines. When cutting the thread, do it in the order from bottom to top, from right to left, so that the pattern we transferred will not be embarrassed.Beginners must have confidence in themselves, place the needle and start the needle cleanly, without stopping, otherwise it is easy to stop. Try not to talk to guests when cutting the thread.
Points to pay attention to separately for several lines.Curved lines: pay attention to the lines to be round and smooth, and the connection should be natural and smooth. Right-angle line: Pay attention to the place where the right-angle connects. Arc-tip line: Note that the needle must be gently lifted at the end, and the connection must be good. Arc-pointed round line: do not stop the needle at the point where it is rounded, but stop the needle after smoothing it over.
