There are many ways to do haze, and here is the basic way.
* The needle is usually about 2-3 mm, the machine is adjusted to a soft force, and the needle is lightly squeezed and then gradually increased. The rotation or flat push can be done. The needle seems to be sweeping the skin, and the needle mouth can be perpendicular to the skin. You can maintain a certain angle and knead repeatedly. The more you knead, the more the mist will be and the more even, but be careful not to smash the skin.
* Light mist can stab lightly or re-stab, depending on everyone's habits. You can go from dark to light, or go from light to dark, but it's easier to go from light to dark.
* Before making the haze, you can mix several colors of different colors. When mixing, you can dilute with pure water and put them in different color cups for use. At the same time, prepare another cup of water to adjust the concentration of the color at any time. .
* The connection between the two color scales is very important when doing light fog, it is necessary to grasp the excessive force to make the connection more natural. When transitioning to a darker color, the darker color (black) should be made with the undiluted primary color first, and not covered with a light color before heavy fogging, because the skin after injury is heavily fogged It will look gray instead of very bright black.
Precautions:
* Because the skin will be red when the thorn is very light, it seems to have no color. This should be mastered by experience. A simple method is that the color of the light mist can be seen within a short time just after the thorn, If you pierce the skin again, it will become red and no color will be seen. Then the color at the moment is actually the color depth you stabbed.
