Most of the slicing needles are completed with round needles. Commonly used slicing needles are 3, 5, 7, 9, etc. The best choice for cutting needles is round needles that have been sharpened. Bifurcation is prone to occur during secant lines, and the feeling of secant lines is not round and full.
* When cutting the needle, the needle is about 1.5 mm. The needle is too short to cut the thread, but the needle is too long to make the needle stagnate, and it will scratch the skin, and the needle will jump easily.
* The conventional method of slicing is to press the needle mouth tightly against the skin, and move the needle at a uniform speed. The speed should not be too slow or too fast, the speed of the needle is too slow, the lines are easy to faint, or spots appear. Running the needle too quickly will make the lines unclear or intermittent. Note that this method should be mastered because it is not easy to see the needle tip during the cutting process, and sometimes it is not easy to grasp the accurate direction. Find a good sense of needle.
* Apply Vaseline to the skin when cutting to increase the lubricity, so that the needle will flow smoothly.
* The strength of the cutting line should be moderate. Generally, the strength of the character of the cutting line is slightly lower than that of the fog machine, but the frequency is greater than that of the fog machine. Such a machine will have a rounder and smoother line when cutting.
* The secant line can be black or color paint. Sometimes it can also be cut with water in order not to show the color of the secant line. For example, to make a light and dark picture, you don't need to show the line, but you need contour positioning. Cutting with water, its advantage is that you can see the positioning line of the outline during the process, but you will not see the line after the tattoo is restored.
* Use a large needle to cut the line to master the strength to avoid excessive skin damage and scars. If the graphics require very thick lines, you can also cut the double lines and fill the middle.
Special Needle Method:
* Keep the needle mouth away from the skin and hang the needle to cut the thread. This method is generally used to handle local details. His characteristic is that it is easy to see the position of the needle tip with high accuracy, but it is not suitable for long lines because it cannot be better. Master uniform needle speed.
