There are two types of tattoo machines, one is a dual machine, and the other is a combined machine. The so-called dual machine is a secant machine and a fog machine. The division of labor and performance are different. The fit machine is a machine. When cutting and fogging, you need to manually adjust the frequency of the machine or the size of the power supply to control the operating speed of the machine and the needle ejection to perform the cutting and fogging work.
A good tattoo machine does not lie in the price, but in the structure of the machine, such as the material used, the number of coils, the length of the hanging iron, the hardness of the shrapnel and the feel of the machine. Let me give you a brief explanation.
The overall material of the tattoo machine is cast iron. My personal experience is that stainless steel is not suitable for tattoo machines, and other materials are not suitable. Only cast iron is the most suitable for tattoo machines. As for why I don’t know why, many machines are very smooth in appearance. , With color, the description is stainless steel or other materials, in fact, all are cast iron, but after finishing the deep processing, smoothing for electroplating processing, showing the color and smooth effect. The coil of the fog machine is 10 turns, and the secant is 8 turns. Of course, it is almost invisible from the outside. However, the size of the coil of some fog machine is different from that of the wire cutter, and the fog machine is larger.
Talking about the hanging iron, the length of the hanging iron determines whether the needle can bounce without hindrance without contacting the straight through. However, some machines have short hanging irons. You can lengthen the hanging irons by adjusting the shrapnel, but the shrapnel will be longer. There is a lot of demand for shrapnel. The effect of too hard shrapnel is very bad after lengthening, and the too soft shrapnel can not achieve good results. Only qualified shrapnel is the most ideal.
Ordinary machines can judge whether the machine is good or bad by listening to the sound. It does not emit sparks, and the sound is clear. You can pass the sound of the machine by listening. In terms of experience, large capacitors are better than small capacitors. , But it must be divided into machines! It is best to debug it on-site when buying the machine.
Some friends say that their machine gets hot in less than 10 minutes. Please check to see if the needle bar is frictional and straight when the machine is running. The normal needle should be in the middle of the straight through without touching the straight through around. Control by adjusting the length of the suspended iron and the shrapnel.
